Sinotruk Howo 371 Tipper Truck will be sent to Zimbabwe

The zimbabwe customer has the business of this mine locally and needs to transport coal. Because the place where the customer needs to operate is very narrow. The difficulty of loading and unloading is relatively high. So the sales manager recommends the customer to use howo 8*4 dump truck.

The howo 371 dump truck itself is small in size and the weight of the cargo loaded when loaded is also small. Because of the body, the operation is very flexible, and it is very convenient in narrow and rough places. Also because the customer's project is relatively large, dump truck can shorten the engineering time and improve efficiency.

Considering subsequent customer loading and unloading of bulk cargo, howo u shape dump truck is suitable. The end customer purchased howo 371Hp 8*4 dump truck.

Sinotruk Howo 371 Tipper Truck will be sent to Zimbabwe

Howo Tipper truck lifting operation and precautions

1. Howo 371Hp tipper truck lifting operation sequence: open the tarpaulin or box cover of the compartment, open the rear door locking device, step on the clutch and wait for 5 seconds when the gearbox is in a neutral state, combine the power take-off, and switch to a low gear (below 4th gear) ), put the handle of the air control valve in the up position, release the clutch and the vehicle starts to lift, you can step on the engine accelerator properly but it must be controlled within 1500 rpm, when the cylinder reaches the maximum stroke or the limit valve works, put the handle of the air control valve in the up position Stop position.

2. Howo tipper truck for sale descending operation sequence: depress the clutch and wait for 5 seconds, disengage the power take-off, disengage the transmission gear, release the clutch, and slowly turn the handle of the air control valve from the stop position to the descending position (turn over after the great luck) The air control valve of the hydraulic lifting system of the unloading semi-trailer is a proportional control valve, which can control the descending speed of the oil cylinder. The closer the handle is to the descending position, the faster the descending speed of the oil cylinder). stop position.

Sinotruk Howo 371 Tipper Truck will be sent to Zimbabwe

3. Precautions for 8*4 tipper truck lifting operation

Sinotruck Howo tipper truck for sale in zimbabwe hydraulic cylinder is a special cylinder for lifting. It is strictly forbidden to use the cylinder as a stable support for the car body; the time when the cylinder is exposed to the air in the lifting state shall not exceed 2 hours (not more than 30 minutes in humid air), otherwise It will cause oxidation and corrosion of the cylinder.

It is strictly forbidden to disassemble and adjust the relief valve on the lift valve, otherwise the hydraulic system will lose its safety protection function and cause an accident; howo tipper truck ensures that the front and rear and left and right loading are evenly loaded when loading goods. Loading the goods too far forward will cause the hydraulic system to overload. Loading the goods too far back will cause the vehicle to overturn when unloading, and the eccentric load on the left and right of the goods will easily strain the oil cylinder and rollover.

When unloading the howo tipper trucks, making sure that the unloading ground where the vehicle is located is firm and flat, that the truck is level, and that the main vehicle and the truck are in a straight line.

Sinotruk Howo 371 Tipper Truck will be sent to Zimbabwe